topic Mesh topology from SNMP in Access Points - Indoor and Outdoor

Mesh topology from SNMP

kathy_ma — Thu, 26 Feb 2015 00:32:46 GMT

Hello,

We are building an IOS app for client and need to show the mesh topology and client device types in it. Is there a way to get this information using SNMP protocol?

Re: Mesh topology from SNMP

bill_burns_6069 — Wed, 13 May 2015 00:33:38 GMT

AFAIK: The information you're looking for is *not* in the Ruckus MIB.
..but feel free to look for yourself.
https://support.ruckuswireless.com/software/708-zonedirector-9-10-mibs-zip

It would be awesome if that info was available via SNMP.
If you don't find it in the MIB, try asking your sales rep for that feature.

Here's some other info on reading SNMP data out of a ZoneDirector:
https://forums.ruckuswireless.com/ruckuswireless/topics/how_to_get_traffic_information_from_ethernet...

Re: Mesh topology from SNMP

bill_burns_6069 — Fri, 15 May 2015 23:37:29 GMT

FYI: if you ssh to a meshed ruckus AP and type:
get mesh

you'll get interesting results.
If you like what you see, then ssh to a ZD controller and type:

enable
debug
rksap_cli -A "get mesh"

If you need info on automating this process and downloading the results, let me know.