topic Re: unleashed r310 in Access Points - Indoor and Outdoor

unleashed r310

salvador_s_nche — Tue, 08 Sep 2020 02:11:12 GMT

Hello good evening, my question is the steps to follow to change the firmware from the r310 model to stand alone mode to fimware unleashed and once I make the change to unleashed mode, I can manage my network from my cell phone and in the same way the steps to follow to register my ap, I would greatly appreciate your response, greetings

Re: unleashed r310

sanjay_kumar — Tue, 08 Sep 2020 03:20:10 GMT

Hi CHAVA,

For upgrading the AP to Unleashed version: 200.7.10.202.118

1. What is the current firmware version of the AP?
2. If it is running on ZD or vSZ firmware then, factory reset the AP >> load the the below standalone version 110 on the AP.
https://support.ruckuswireless.com/software/2431-zoneflex-solo-access-point-110-0-0-0-2005-ga-softwa...
3. We can upgrade from the GUI itself.
4. Once the AP is upgraded, load the below Unleashed version on the AP.
5. https://support.ruckuswireless.com/software/2556-ruckus-unleashed-ap-200-7-10-202-118-ga-refresh4-so...

For Managing the Unleashed from Mobile:
Please refer the below link and check the section "Enabling Mobile App Remote Management" and "Generating an Unleashed ID".
https://support.ruckuswireless.com/documents/2599-ruckus-unleashed-200-7-ga-user-guide/download

I hope this helps.

Re: unleashed r310

h_ayoub — Tue, 29 Sep 2020 17:54:20 GMT

Dear Sanjay, I have the same issue but I have done as you requested above and it was not successful. My R310 is currently on software 110.0.0.0.2005 . It is not letting me upgrade to the next file linked in point 5 above.

Re: unleashed r310

h_ayoub — Tue, 29 Sep 2020 17:57:17 GMT

Also I just tried an older version (R310_200.6.10.1.310) and received error message:

Upgrade/Downgrade from FSI to UI is not allowed.

Re: unleashed r310

sanjay_kumar — Wed, 30 Sep 2020 00:58:04 GMT

Hi Ayoub,

Can you help me with the below command output from the AP?
"fw show all"

You might have to type "ap-mode" if the CLI prompt is "ruckus#"

Re: unleashed r310

h_ayoub — Wed, 30 Sep 2020 11:25:18 GMT

Sanjay, thanks, but can you explain to me where i need to go and type those commands?

Re: unleashed r310

h_ayoub — Wed, 30 Sep 2020 11:44:52 GMT

To be clear also, I have been accessing the web UI.

Re: unleashed r310

syamantakomer — Wed, 30 Sep 2020 12:15:48 GMT

Hi Ayoub,

SSH into the AP using putty application or any terminal app, and then run the command.

Regards,
Syamantak Omer

Re: unleashed r310

h_ayoub — Wed, 30 Sep 2020 21:10:49 GMT

rkscli: fw show all

ipaddr:

file: R500_110.0.0.0.2005.bl7

size: 10985472

MD5 : CFE08D288A3A9C85212208506FF652F6

type: 0

local_file

-------------------------------------

current primary boot image is Image1

---------------

Magic: RCKS

next_image: 0x130000

invalid: 0

hdr_len: 160

compression: l7

load_address: 0x80080000

entry_point: 0x80307210

timestamp: Tue Feb 25 20:35:58 2020

binl7_len: 10985312

hdr_version: 4

hdr_cksum: 0xFD08

version: 110.0.0.0.2005 ( 110.0.0.0.2005 )

MD5: CFE08D288A3A9C85212208506FF652F6

product: zf7752 (0)

architecture: 1

chipset: 3

board_type: 0

board_class: 3

customer:

Image Sign Type: Fully Signed Image(FSI).

---------------

Magic: RCKS

next_image: 0x130000

invalid: 0

hdr_len: 160

compression: l7

load_address: 0x80080000

entry_point: 0x8030B420

timestamp: Wed Jun 13 13:02:24 2018

binl7_len: 23377756

hdr_version: 4

hdr_cksum: 0x71D5

version: 200.6.10.1.310 ( 200.6.10.1.310 )

MD5: 8ECDBC4FE1CBCC324F95D8958258B8AD

product: zf7752 (0)

architecture: 1

chipset: 3

board_type: 0

board_class: 3

customer:

Image Sign Type: Intermediate Signed Image(ISI).

Tail start: 0x164af60

rkscli:

Re: unleashed r310

h_ayoub — Wed, 30 Sep 2020 22:17:59 GMT

Thanks. Just tried upgrading to R310_200.6.10.1.312 and it worked. For some reason the 310 does not work.

Re: unleashed r310

sanjay_kumar — Thu, 01 Oct 2020 00:17:40 GMT

Hi Ayoub,

I'm glad to hear that the issue is resolved.