https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/VSZ-upgrade-form-3-2-via-3-5-to-3-6-inbound-connections-to/m-p/13195#M3165 Hey Guys,<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />I have found 1 issue after upgrading my VSZ over the weekend. Inbound connections to Wireless clients no longer work. TCP dump on the firewall shows the packets leaving correctly but nothing get to the clients (Using wireshark so should be intercepting before the windows firewall) I have tested on AP firmware 3.5.1.0.1010 and 3.6.2.0.695.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />This was working on 3.2 and no other changes have been made over the last few days<BR alt="" name="" rel="" target="" title="" type="" value="" />Also confirmed the following:<BR alt="" name="" rel="" target="" title="" type="" value="" />Wireless Client Isolation : disabled <BR alt="" name="" rel="" target="" title="" type="" value="" />User traffic Profile: System Default <BR alt="" name="" rel="" target="" title="" type="" value="" />L2 Access Control : Disabled <BR alt="" name="" rel="" target="" title="" type="" value="" />OS Policy : Disabled <BR /><BR />I have logged a call with our Partner support just waiting to hear back. In the mean time does anyone in the community have any ideas what could be blocking this?<BR alt="" name="" rel="" target="" title="" type="" value="" /> Sat, 22 Jun 2019 04:11:14 GMT chris_griffith1 2019-06-22T04:11:14Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/VSZ-upgrade-form-3-2-via-3-5-to-3-6-inbound-connections-to/m-p/13195#M3165 Hey Guys,<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />I have found 1 issue after upgrading my VSZ over the weekend. Inbound connections to Wireless clients no longer work. TCP dump on the firewall shows the packets leaving correctly but nothing get to the clients (Using wireshark so should be intercepting before the windows firewall) I have tested on AP firmware 3.5.1.0.1010 and 3.6.2.0.695.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />This was working on 3.2 and no other changes have been made over the last few days<BR alt="" name="" rel="" target="" title="" type="" value="" />Also confirmed the following:<BR alt="" name="" rel="" target="" title="" type="" value="" />Wireless Client Isolation : disabled <BR alt="" name="" rel="" target="" title="" type="" value="" />User traffic Profile: System Default <BR alt="" name="" rel="" target="" title="" type="" value="" />L2 Access Control : Disabled <BR alt="" name="" rel="" target="" title="" type="" value="" />OS Policy : Disabled <BR /><BR />I have logged a call with our Partner support just waiting to hear back. In the mean time does anyone in the community have any ideas what could be blocking this?<BR alt="" name="" rel="" target="" title="" type="" value="" /> Sat, 22 Jun 2019 04:11:14 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/VSZ-upgrade-form-3-2-via-3-5-to-3-6-inbound-connections-to/m-p/13195#M3165 chris_griffith1 2019-06-22T04:11:14Z