topic Re: combine different APs version in same environments in Access Points - Indoor and Outdoor

combine different APs version in same environments

bandar_aldawees — Thu, 04 Jun 2020 12:53:36 GMT

dears,

Can i combine WW (World Wide) version APs with US APs in same environments

Re: combine different APs version in same environments

albert_pierson — Thu, 04 Jun 2020 13:12:54 GMT

Hi Bandar,

US AP's can only be used with controllers set for US country code. They are locked to just US approved frequencies and power levels.

WW AP's can be used with any country code setting, including US. They are not locked to a fixed set of channels. So you should be able to use WW AP's in a system set for US country code.

But using WW AP's in the USA is forbidden by the FCC.

I hope this answers your question.

Thanks

Albert

Re: combine different APs version in same environments

diego_garcia_de — Thu, 04 Jun 2020 14:33:41 GMT

But asuming you're outside the US, if you set a zone's country code to US, you are able to connect both WW and US aps. Please correct me if im wrong Albert.

Re: combine different APs version in same environments

albert_pierson — Thu, 04 Jun 2020 14:59:03 GMT

Yes, WW AP's can join US designated Zones.

The country code test is done when the AP tries to join the controller. US AP's will not be able to join zones set for any other country code, but WW can join US designated zones. US coded AP's have an internal configuration designating them as Fixed Country Code. This configuration is done when the AP is manufactured and cannot be changed by customers.

Re: combine different APs version in same environments

bandar_aldawees — Thu, 04 Jun 2020 15:12:17 GMT

Thank you all.
Yes i’m outside The US but i have us product.
And someone donated WW version.