https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12251#M2912 we have ZD 1100 set to auto detect but it does not see them Tue, 11 Mar 2014 16:26:11 GMT bill_downs_6422 2014-03-11T16:26:11Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12251#M2912 we have ZD 1100 set to auto detect but it does not see them Tue, 11 Mar 2014 16:26:11 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12251#M2912 bill_downs_6422 2014-03-11T16:26:11Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12252#M2913 ZOne director 1106 was upgraded to 12 ports if that makes a difference Tue, 11 Mar 2014 16:27:09 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12252#M2913 bill_downs_6422 2014-03-11T16:27:09Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12253#M2914 Hi Bill, <BR /><BR /> Could be lots of things, not much to go on here...is this a new installation (so it has never worked?). Or is it a working ZD1106 and when you added the 6 AP license then things broke? <BR /><BR /> What version of ZoneFlex is running? <BR /><BR /> What models of AP's do you have? <BR /><BR /> How are the AP's logically connected (same LAN, same VLAN, across a switch, routed, NAT'd, etc) to the ZD? Are you running across a tunnel or using MPLS? <BR /><BR /> If the ZD isn't seeing anything at all from the APs the most likely issue is L2/L3 connectivity isn't right. Tue, 11 Mar 2014 19:10:54 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/1100-auto-config-wont-see-aps/m-p/12253#M2914 keith_redfield 2014-03-11T19:10:54Z