https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Scheduled-reboot-to-revert-from-changes-to-P300-via-CLI/m-p/12200#M2882 Not clear.  You configure P300s to communicate, but you want them to go back to default after some period of time or when you run this/these commands (and lose your link)? Mon, 02 Jul 2018 22:58:36 GMT michael_brado 2018-07-02T22:58:36Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Scheduled-reboot-to-revert-from-changes-to-P300-via-CLI/m-p/12199#M2881 I would like to ability to do a "reload in xx:xx:xx" style command like you can in IOS. The idea would be to schedule a reload to revert from changes in case something I do on the radio causes it to lose contact. Any ideas? Mon, 02 Jul 2018 22:40:57 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Scheduled-reboot-to-revert-from-changes-to-P300-via-CLI/m-p/12199#M2881 brian_millin 2018-07-02T22:40:57Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Scheduled-reboot-to-revert-from-changes-to-P300-via-CLI/m-p/12200#M2882 Not clear.  You configure P300s to communicate, but you want them to go back to default after some period of time or when you run this/these commands (and lose your link)? Mon, 02 Jul 2018 22:58:36 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Scheduled-reboot-to-revert-from-changes-to-P300-via-CLI/m-p/12200#M2882 michael_brado 2018-07-02T22:58:36Z