Monitoring of ruckus 2942 using nagios via snmp

zildjian — Thu, 06 Mar 2014 08:45:06 GMT

Im really new in NMS, specifically nagios which looks quite a bit complicated and daunting.

i have 2 ruckus 2942 that i want to monitor via nagios SNMP.

on the AP side, i have Software Version: 9.5.0.0.156
and under administration > management, i selected SNMP only.
thats seems to be the only config i can find for snmp in ruckus.

on Nagios side, i typed-in the address of my AP (same subnet with nagios), and i have no clue what to put under "SNMP services"

i googled for ruckus 2942, even checked the manual of the AP, but there were no instructions how to add ruckus 2942 OID's on a 3rd party NMS

really need your assistance on this please.

thanks.

Re: Monitoring of ruckus 2942 using nagios via snmp

keith_redfield — Thu, 06 Mar 2014 16:26:11 GMT

Each NMS has it's own methods for loading the MIB files. I would honestly steer you towards Cacti or OpenNMS (or any one of dozens of others)- both a quite a lot easier to use (esp Cacti). Nagios makes my head hurt every time I look at it. The MIB files for each specific release can be found in the Download area of our website.

topic Monitoring of ruckus 2942 using nagios via snmp in Access Points - Indoor and Outdoor

Monitoring of ruckus 2942 using nagios via snmp

Re: Monitoring of ruckus 2942 using nagios via snmp