https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Passthrough-Solutions-for-Down-APs/m-p/11226#M2593 The LAN is important as in this case of a down AP;as One can connect a Router to the LAN to provide temporary wireless solution while AP is troubleshooted. Wed, 05 Nov 2014 03:36:54 GMT wale_idowu 2014-11-05T03:36:54Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Passthrough-Solutions-for-Down-APs/m-p/11225#M2592 I tested some APs to know the functionality of the PT port i.e 7055 &amp; 7025; &amp; I learnt how it works. Although i was wondering if the Pass-through port could be used as a solution for a down AP. <BR /><BR /> Thing is: In my network, the previous config was: <BR /> PoE Switch----&gt;LAN Faceplate in Room ---&gt; Access Point. <BR /><BR /> Now with Network Revamping going on, we have: <BR /> PoE Switch----&gt;Access Point------&gt; LAN FacePlate in room. <BR /><BR /> The Point of Failure in this is: if the AP is down, The LAN wouldn't be able to work. How can i use the Pass through to work around this constraint. Any Scenario would is welcome. Wed, 05 Nov 2014 03:25:23 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Passthrough-Solutions-for-Down-APs/m-p/11225#M2592 wale_idowu 2014-11-05T03:25:23Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Passthrough-Solutions-for-Down-APs/m-p/11226#M2593 The LAN is important as in this case of a down AP;as One can connect a Router to the LAN to provide temporary wireless solution while AP is troubleshooted. Wed, 05 Nov 2014 03:36:54 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Passthrough-Solutions-for-Down-APs/m-p/11226#M2593 wale_idowu 2014-11-05T03:36:54Z