topic I can not add an AP to my SZ in Access Points - Indoor and Outdoor

I can not add an AP to my SZ

edher_angel_vel — Thu, 15 Dec 2016 17:56:44 GMT

I have a SZ but I can not add an AP to the controlerI'm using the "set directory ip" tells me that it does not recognize the command.

I understand that's another command. But I do not know what the procedure is for switching from firmware sw ZD to SZ.

Could you help with the procedure?

My AP is an R500

Re: I can not add an AP to my SZ

michael_brado — Thu, 15 Dec 2016 18:15:15 GMT

Hi Edher,

The command is "set scg ip a.b.c.d" to direct your AP to a SmartZone controller.

https://support.ruckuswireless.com/answers/000003403

Re: I can not add an AP to my SZ

edher_angel_vel — Thu, 15 Dec 2016 18:18:36 GMT

Thank you.
But if my AP has been working on a ZD. And now it's going to work on a SZ, would it have to do some upgrading to the AP?
Or would I just connect it and give you the command you tell me?

Re: I can not add an AP to my SZ

ismael_kouma — Thu, 15 Dec 2016 19:07:24 GMT

Try upgrade firmware 100.0.0.127 version to your AP and then connect it to your Sz all will be ok