https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Does-either-5Ghz-or-2-4Ghz-performance-suffer-with-both-bands-on/m-p/10643#M2419 Consider this. A 7372 with the same SSID on both bands. Some clients connected via 5Ghz and some at 2.4Ghz. Would I see any performance issues with these clients on either band? I have seen this issue with other vendors APs. Tue, 27 Aug 2013 19:43:25 GMT jgadbois_jjcgrp 2013-08-27T19:43:25Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Does-either-5Ghz-or-2-4Ghz-performance-suffer-with-both-bands-on/m-p/10643#M2419 Consider this. A 7372 with the same SSID on both bands. Some clients connected via 5Ghz and some at 2.4Ghz. Would I see any performance issues with these clients on either band? I have seen this issue with other vendors APs. Tue, 27 Aug 2013 19:43:25 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Does-either-5Ghz-or-2-4Ghz-performance-suffer-with-both-bands-on/m-p/10643#M2419 jgadbois_jjcgrp 2013-08-27T19:43:25Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Does-either-5Ghz-or-2-4Ghz-performance-suffer-with-both-bands-on/m-p/10644#M2420 Hi, <BR /><BR /> 5GHz and 2.4GHz are simply different frequencies, each with its advantages and disadvantages. To get the best of both worlds, 5GHz offers higher throughput at a shorter distance, while 2.4GHz offers increased coverage and higher solid object penetration. <BR /><BR /> If you have high quality Wi-Fi client devices, it's best to use the same SSID for both bands so your clients will automatically roam to the band that suits their needs best. <BR /><BR /> If it is an Ideal WiFi network without any interference then it should not be problem to configure same SSID with both band's. Wed, 28 Aug 2013 20:36:54 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Does-either-5Ghz-or-2-4Ghz-performance-suffer-with-both-bands-on/m-p/10644#M2420 harish_kumar_56 2013-08-28T20:36:54Z