https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3420#M230 Whoops I got my products mixed up...I meant to say the H500 not the R300...but I suppose it could still apply to an ap that has a ethernet port. Thu, 07 Apr 2016 14:38:52 GMT kieth_hoover 2016-04-07T14:38:52Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3418#M228 So we have a ssid that uses dynamic-psk to assign the vlan of connected devices. &nbsp;If an R300 has a wired device connected to it ...how will the wired devices get the the proper dynamic VLAN? &nbsp;I have tested this with other repeaters (not Ruckus) and while the repeater can connect, any client wired devices cannot because they have different MAC addresses. Thu, 07 Apr 2016 14:10:04 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3418#M228 kieth_hoover 2016-04-07T14:10:04Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3419#M229 Perhaps an oversimplification but basically we are looking for a solution for a wireless bridge ...ie runs in "WET", "universal", or "bridge" mode and hides client devices mac address. Thu, 07 Apr 2016 14:18:04 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3419#M229 kieth_hoover 2016-04-07T14:18:04Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3420#M230 Whoops I got my products mixed up...I meant to say the H500 not the R300...but I suppose it could still apply to an ap that has a ethernet port. Thu, 07 Apr 2016 14:38:52 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3420#M230 kieth_hoover 2016-04-07T14:38:52Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3421#M231 Ah, that actually simplifies things (maybe). &nbsp;<BR />If your attached device should always use VLAN X, you can specify that VLAN as the Access VLAN for the PoE out LAN port.<BR />Devices attached, will send their DHCP to the server on that VLAN. Thu, 07 Apr 2016 23:15:18 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/do-wired-devices-work-on-the-r300-with-dynamic-psk-and-dynamic/m-p/3421#M231 michael_brado 2016-04-07T23:15:18Z