topic Re: Upgrade ZF 7363 to ZF R510 on new ZD1200 in Access Points - Indoor and Outdoor

Upgrade ZF 7363 to ZF R510 on new ZD1200

chet_rodriguez_ — Mon, 12 Jun 2017 20:32:27 GMT

I have swapped out our ZD1100 for a new ZD1200 successfully. I used the backup from the ZD1100 V9.8.3 to configure the 1200. Now I can't get it to recognize the 510 APs as I swap the out. Any ideas? I haven't upgraded ZD yet as I don't want to lose my current AP connectivity until I swap them out.

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

nat_nat — Mon, 12 Jun 2017 20:43:41 GMT

Hi Chet,

I am glad to hear that you replaced ZD110 with ZD1200 successfully. ZD1200 started to support R510 from version 9.13. So, pl upgrade the software to 9.13 or above to get it recognized by ZD1200.

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

michael_brado — Mon, 12 Jun 2017 20:44:38 GMT

Hi Chet,

   Not to worry (yet). You'll need to upgrade your ZD1200 to version 9.13 (GA) before the R510
model is supported.
https://support.ruckuswireless.com/documents/1105-zoneflex-9-13-ga-what-s-new

   But about the "worry" part, are all your other model APs *also* supported by 9.13 code?
https://support.ruckuswireless.com/documents/1104-zoneflex-9-13-ga-release-notes
   See Supported APs, starting on page 7.

   It's best to schedule a Change Management period to perform your ZD upgrades, when
the least number of users will be affected, that is a best practice.

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

chet_rodriguez_ — Mon, 12 Jun 2017 20:51:11 GMT

The ZD1200 says it is at 9.9....

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

chet_rodriguez_ — Mon, 12 Jun 2017 20:51:41 GMT

Never mind....l

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

chet_rodriguez_ — Mon, 12 Jun 2017 21:02:22 GMT

Thanks. working on it. They will be supported still with 9.13

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

chet_rodriguez_ — Mon, 12 Jun 2017 21:06:06 GMT

I can't find the upgrade path. I received a warning that 9.13 was applicable to 9.10 and up.

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

chet_rodriguez_ — Mon, 12 Jun 2017 23:50:57 GMT

Waiting on support to call me back...... I have upgraded completely to 10.0. APs were lost at 9.13. Now I can't get the ZD to recognize the R510 APs. This is what I didn't want to happen.

Re: Upgrade ZF 7363 to ZF R510 on new ZD1200

chris_nicholson — Tue, 20 Jun 2017 13:54:16 GMT

I have yet to put 10 on anything.

What do you mean by "APs were Lost"?