https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9275#M2075 Can anyone please explain me the called-station-id-type and NAS-ID (RADIUS)? This is mostly required when configuring a hospot WLAN in a ZD. Thu, 16 Oct 2014 12:10:17 GMT koen_verbeeck 2014-10-16T12:10:17Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9275#M2075 Can anyone please explain me the called-station-id-type and NAS-ID (RADIUS)? This is mostly required when configuring a hospot WLAN in a ZD. Thu, 16 Oct 2014 12:10:17 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9275#M2075 koen_verbeeck 2014-10-16T12:10:17Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9276#M2076 Hi Keon, <BR /><BR /> I am not sure what exactly you would like to know on called-station-id-type and NAS-ID however let me give it a shot. this is very common all across all systems which uses radius. <BR /><BR /> Called Station ID: For IEEE 802.1X Authenticators, this attribute is used to store the <BR /> bridge or Access Point MAC address in ASCII format (upper case only), <BR /> with octet values separated by a "-". Example: "00-10-A4-23-19-C0". <BR /> In IEEE 802.11, where the SSID is known, it SHOULD be appended to the <BR /> Access Point MAC address, separated from the MAC address with a ":". <BR /> Example "00-10-A4-23-19-C0:AP1" <BR /><BR /> NAS ID: The NAS-ID is sent to the RADIUS server by the controller through an authentication request to classify users to different groups so that the RADIUS server can send a customized authentication response. The NAS-identifier is a RADIUS attribute that the client uses to identify itself to a RADIUS server. The NAS-Identifier, as defined in Section 5.32 of RFC 2865, can be used instead of an IP address to identify the client. The NAS-identifier consists of one or more octets and must be unique in the scope of the RADIUS server Thu, 16 Oct 2014 14:24:59 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9276#M2076 monnat_systems 2014-10-16T14:24:59Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9277#M2077 Hello Monnat, but how i configure the NAS-id in the controller? i don't see the option in the GUI.<BR />reagards Tue, 22 Sep 2015 08:50:39 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-anyone-please-explain-me-the-called-station-id-type-and-NAS/m-p/9277#M2077 nuno_pimentel 2015-09-22T08:50:39Z