https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/ZF7055-providing-downstream-PoE-and-dual-SSID-wi-fi-to-2nd-AP/m-p/8462#M1830 I have a zf7055 providing downstream PoE and dual SSID wi-fi to a zf7363 using VLANs to segregate the guest wi-fi from the private wi-fi. We also use a ZD1106. I just came across the "model specific control" to configure the ports on the zf7055. The issue I'm experiencing is the zf7363 only connects successfully to the private wi-fi and the guest wi-fi pulls an APIPA IP.  Is there an example on how to set the model specific control for LAN4+PoE port for this configuration so the guest VLAN also passes to the zf7363?  Wed, 13 May 2015 19:25:52 GMT b_battle 2015-05-13T19:25:52Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/ZF7055-providing-downstream-PoE-and-dual-SSID-wi-fi-to-2nd-AP/m-p/8462#M1830 I have a zf7055 providing downstream PoE and dual SSID wi-fi to a zf7363 using VLANs to segregate the guest wi-fi from the private wi-fi. We also use a ZD1106. I just came across the "model specific control" to configure the ports on the zf7055. The issue I'm experiencing is the zf7363 only connects successfully to the private wi-fi and the guest wi-fi pulls an APIPA IP.  Is there an example on how to set the model specific control for LAN4+PoE port for this configuration so the guest VLAN also passes to the zf7363?  Wed, 13 May 2015 19:25:52 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/ZF7055-providing-downstream-PoE-and-dual-SSID-wi-fi-to-2nd-AP/m-p/8462#M1830 b_battle 2015-05-13T19:25:52Z