https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-view-standalone-7363-configuration-via-AP-CLI/m-p/8348#M1808 APs CLI is a get/set type. So you need to "get" anything you're interested in. If you however have your AP connected to a ZD, you can run a command <BR /><BR /> show ap mac MAC_OF_AP <BR /><BR /> ON THE ZD. <BR /><BR /> However, if you want to get details you will still have to SSH to an AP and "get" specific settings. <BR /><BR /> Maybe this should fall into the category of feature request. A "get all" command in the AP to get everything from it. Mon, 10 Feb 2014 08:31:49 GMT primoz_marinsek 2014-02-10T08:31:49Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-view-standalone-7363-configuration-via-AP-CLI/m-p/8347#M1807 Can anyone tell me the CLI command to view AP's configuration, similar as show running-config in Cisco IOS? Mon, 10 Feb 2014 08:13:34 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-view-standalone-7363-configuration-via-AP-CLI/m-p/8347#M1807 qi_ying 2014-02-10T08:13:34Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-view-standalone-7363-configuration-via-AP-CLI/m-p/8348#M1808 APs CLI is a get/set type. So you need to "get" anything you're interested in. If you however have your AP connected to a ZD, you can run a command <BR /><BR /> show ap mac MAC_OF_AP <BR /><BR /> ON THE ZD. <BR /><BR /> However, if you want to get details you will still have to SSH to an AP and "get" specific settings. <BR /><BR /> Maybe this should fall into the category of feature request. A "get all" command in the AP to get everything from it. Mon, 10 Feb 2014 08:31:49 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-view-standalone-7363-configuration-via-AP-CLI/m-p/8348#M1808 primoz_marinsek 2014-02-10T08:31:49Z