https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-check-if-BeamFlex-is-enable-on-R770/m-p/109650#M16335 <P>I recently replaced an old access point with a R770. However, i hasn't noticed any improvement in performance compared to the old setup-especially in weaker coverage areas like corners of the building.</P><P>I'd like to know how to verify whether BeamFlex+ technology is actually enable on the R770. Are there specific logs, CLI commands, or indicators in the controller interface that clearly show it's active?</P><P>Also, is there a way to objectively compare performance with BeamFlex+ enable versus disable? Ideally, i'd like to demonstrate whether this feature is making a tangible difference in my environment.</P><P>Thanks in advance for your help!&nbsp;</P> Wed, 17 Sep 2025 06:53:56 GMT Hunter 2025-09-17T06:53:56Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-check-if-BeamFlex-is-enable-on-R770/m-p/109650#M16335 <P>I recently replaced an old access point with a R770. However, i hasn't noticed any improvement in performance compared to the old setup-especially in weaker coverage areas like corners of the building.</P><P>I'd like to know how to verify whether BeamFlex+ technology is actually enable on the R770. Are there specific logs, CLI commands, or indicators in the controller interface that clearly show it's active?</P><P>Also, is there a way to objectively compare performance with BeamFlex+ enable versus disable? Ideally, i'd like to demonstrate whether this feature is making a tangible difference in my environment.</P><P>Thanks in advance for your help!&nbsp;</P> Wed, 17 Sep 2025 06:53:56 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-check-if-BeamFlex-is-enable-on-R770/m-p/109650#M16335 Hunter 2025-09-17T06:53:56Z