Reprogramming Ruckus H350 Access Points version 901-H350-US00.

hp7593 — Sat, 23 Aug 2025 18:42:38 GMT

This was the method I used to reprogram the firmware:

Firmware used for XX = 116.0.0.0.3128_H350.bl7

It's very important to set up the network on the notebook first.

Windows Key -> Network status à Ethernet Settings – Select wired network. -> Change adapter options -> Select network -> R-click + Properties -> Double click Internet Protocol Version 4 (TCP/IPv4) -> select Use the following IP address on notebook. -> IP address = 192.168.0.2 -> Subnet mask = 255.255.255.0 -> Nothing for DNS server. -> Press OK.

Connect the Ruckus AP directly with a POE injector; one end goes into the Ruckus AP, and the other end into the network-attached notebook.

Open Firefox and type in 192.168.0.1

Once inside the Ruckus AP, follow the prompts to set up the AP.

Re: Reprogramming Ruckus H350 Access Points version 901-H350-US00.

Vineet_nejwala — Tue, 26 Aug 2025 10:40:21 GMT

Hi hp7593

The above process should/would work. If any issue please let us know and we would be happy to help.

Best Regards

Vineet