topic Re: how to ssh from powershell to ruckus wireless AP (standalone) in Access Points - Indoor and Outdoor

how to ssh from powershell to ruckus wireless AP (standalone)

stephan_van_der — Wed, 20 Jan 2021 19:06:46 GMT

I can start an SSH session to an R300 using these commandlets:

PS C:\WINDOWS\system32> $ruckussession = New-SSHSession -ComputerName 192.168.5.2 -Credential $cred
PS C:\WINDOWS\system32> Invoke-SSHCommand -Index $ruckussession.SessionId -Command $commands

But whatever the $commands, this gives output:

Host : 192.168.5.2
Output : {, Please login: }
ExitStatus : 1

This seems to be the same thing as when logging on via putty: One has to login al thougt credentials are sent with starting the SSH session. How can I overcome this?

Re: how to ssh from powershell to ruckus wireless AP (standalone)

syamantakomer — Wed, 20 Jan 2021 20:44:09 GMT

Hi Stephen,

This is expected, because Ruckus AP CLI prompts below information when you try to SSH.

Please login

password

In "Login as" prompt, you can feed any dummy data, but actual login username is required on "Please login" prompt.

Refer the below login output from putty.

Please login: admin
password :
Copyright(C) 2018 Ruckus Wireless, Inc. All Rights Reserved.

** Ruckus T750 Multimedia Hotzone Wireless AP: xxxxxxxxxxx

rkscli:

Modify your login commands and add the context for "Login as", and it should work.

Re: how to ssh from powershell to ruckus wireless AP (standalone)

stephan_van_der — Wed, 20 Jan 2021 20:53:42 GMT

@syamantak_omer thanks for your reply.

I know how to log on interactively, e.g. via PuTTy. But via powershell SSH session, I cannot get it working. What do you mean exactly with: Modify your login commands and add the context for "Login as"? How can I do this in the powershell script?

Regards,

Stephan van der Plas

Re: how to ssh from powershell to ruckus wireless AP (standalone)

stephan_van_der — Wed, 20 Jan 2021 21:31:09 GMT

This works:

#$cred = Get-Credential
$ruckussession = New-SSHSession -ComputerName 192.168.5.2 -Credential $cred
$sshshellstream = New-SSHShellStream -Index $ruckussession.SessionId
$sshshellstream.WriteLine('super')

$sshshellstream.WriteLine('password')

sleep 2

$sshshellstream.WriteLine('get station wlan10 list')
sleep 2

$sshshellstream.Read()

Thanks for your help. Now I can use this in my Domoticz system for presence detection.

Regards,

Stephan van der Plas

Re: how to ssh from powershell to ruckus wireless AP (standalone)

syamantakomer — Thu, 21 Jan 2021 14:25:55 GMT

Glad to know that you were able to fix it!

Re: how to ssh from powershell to ruckus wireless AP (standalone)

Mario-televic — Tue, 17 Jan 2023 06:52:54 GMT

Hey there, I'm facing the same problem, but trying to connect via Python (Paramiko library) or even Putty-CLI -> where both don't work! When trying manually via putty session it works as described:

1.enter dummer or any USERNAME

2. enter real USERNAME

3 enter PASSWORD

Bun intention is to automate it.

Many thanks for any advise how to solve this

Regards,

Mario

Re: how to ssh from powershell to ruckus wireless AP (standalone)

Jan1 — Wed, 28 May 2025 13:49:39 GMT

Dear Syamantak Omer,

We are experiencing the same issue.

Could you please advice how to prompt the login over SSH ?

The example above also did not resolve the issue.

Jan