H510 standalone firmware independent of ZD

DLaw — Wed, 07 May 2025 09:33:55 GMT

I have and H510 I use as a travel standalone AP. It recently connected to a ZD on a job site and I would like to get it back to a standalone.

I completed a hard reset on the side of the device. I finally figured how to get back into it and I'm connected to it via ethernet cable in LAN4. It's on version 200.15.6.112.52.

I have tried to install H510_114.0.0.0.1360.bl7 when prompted to select image file locally but receive "This does not seem to be a valid upgrade image. Please try another file". I have also tried other files to receive the same notification after attempted uploading of bl7.

Appreciate any assistance to get this back to an AP independent of Unleashed.

Re: H510 standalone firmware independent of ZD

simon_louis — Tue, 13 May 2025 10:01:39 GMT

Hi DLaw,

To convert the AP from unleashed to standalone kindly follow the steps mentioned in our below KB article:

https://support.ruckuswireless.com/articles/000005193

Regards,

Simon

topic Re: H510 standalone firmware independent of ZD in Access Points - Indoor and Outdoor

H510 standalone firmware independent of ZD

Re: H510 standalone firmware independent of ZD