https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R610-is-continuously-rebooting-after-upgrade-upgrade/m-p/104202#M16105 <P>Hi</P><P>I have 3 APs - R610, recent software upgrade to&nbsp;<SPAN>200.15.6.212.20.&nbsp; One of the APs is not joining the mesh and it is continuously rebooting. It looks like it is getting connected on the network and trying to join the Mesh. I get this message when connecting to its IP address:<BR /></SPAN></P><P><SPAN>"Building the Unleashed Network. It may take a few minutes."</SPAN></P><P>Then, it reboots again. I tried to reset it many times, but it keeps into continously reboot cycles. Any ideas on how to fix this.&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Thu, 03 Apr 2025 16:50:51 GMT sunilw04 2025-04-03T16:50:51Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R610-is-continuously-rebooting-after-upgrade-upgrade/m-p/104202#M16105 <P>Hi</P><P>I have 3 APs - R610, recent software upgrade to&nbsp;<SPAN>200.15.6.212.20.&nbsp; One of the APs is not joining the mesh and it is continuously rebooting. It looks like it is getting connected on the network and trying to join the Mesh. I get this message when connecting to its IP address:<BR /></SPAN></P><P><SPAN>"Building the Unleashed Network. It may take a few minutes."</SPAN></P><P>Then, it reboots again. I tried to reset it many times, but it keeps into continously reboot cycles. Any ideas on how to fix this.&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Thu, 03 Apr 2025 16:50:51 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R610-is-continuously-rebooting-after-upgrade-upgrade/m-p/104202#M16105 sunilw04 2025-04-03T16:50:51Z