topic Re: Mounting bracket for warehouse environment in Access Points - Indoor and Outdoor

Mounting bracket for warehouse environment

ryan_sullivan — Wed, 24 Mar 2021 00:08:36 GMT

Has anyone found a good Ruckus compatible mounting bracket for a warehouse environment where you would be securing them to the overhead I-beams? R5xx models.

Re: Mounting bracket for warehouse environment

dave_raines_86z — Wed, 24 Mar 2021 00:18:37 GMT

Use the Ruckus metal mounting plate with some sheet metal screws and you are done. They sell for $25 usually.

Re: Mounting bracket for warehouse environment

sunny_gupta — Wed, 24 Mar 2021 13:23:29 GMT

Hi there, sure you can use the 902-0120-0000 Secure mounting bracket from Ruckus, in combination with steel clamps through the slots on the bracket to secure it to a beam/truss.

See it here:

https://www.commscope.com/globalassets/digizuite/62143-ruckus-accessory-guide.pdf

Re: Mounting bracket for warehouse environment

LynneLayne — Sat, 08 Feb 2025 03:02:06 GMT

You can try the IBeam mount from TBd3D

TBD 3D Ibeam mount