topic Re: R700 firmware upgrade in Access Points - Indoor and Outdoor

R700 firmware upgrade

Mpiatyko — Tue, 17 Dec 2024 13:00:30 GMT

Hi,

I have R700 with current Software Version: 10.2.1.0.129

I want to convert this R700 AP for use without zone director.

Please help me to choose right firmware for upgrade.

Thank you in advance.

Re: R700 firmware upgrade

vasanth_edward — Tue, 17 Dec 2024 16:31:18 GMT

Hi @Mpiatyko,

Thank you for reaching out to Ruckus Technical Support via the Community Forum.

As I understand, you would like to use the R700 as a standalone access point. To proceed, please upgrade the device with the Solo firmware, which can be downloaded from the following link:
https://support.ruckuswireless.com/software/1728-zoneflex-solo-access-point-110-0-0-0-675-ga-software-release-r700

Should you need further assistance with the upgrade or configuration, feel free to contact us.

Regards,
Vasanth Edward
CCNA||CWNA

Re: R700 firmware upgrade

Mpiatyko — Wed, 18 Dec 2024 09:19:11 GMT

Hi @vasanth_edward,

Thank you so much. I have successfully upgraded my R700 to 110.0.0.0.675.

Re: R700 firmware upgrade

Moon72 — Wed, 25 Dec 2024 08:31:11 GMT

@Mpiatyko wrote:
Hi,
I have R700 with current Software Version: 10.2.1.0.129
I want to convert this R700 AP for use without zone director.
Please help me to choose right firmware for upgrade.

Thank you in advance.

To convert your R700 AP for standalone use, upgrade to the ArubaOS 6.5.x or higher firmware version. Ensure compatibility with your device by checking release notes.