https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Zonedirktor-1200-After-RMA-replacing-mesh-ap-s-no-longer-works/m-p/97975#M15774 <P>Hello, we have the following problem:</P><P>New ZoneDirector basic adjustment, firmware update to 10.5.1.0.276, last backup from the old device imported</P><P>- ZD connected to the old hotel location<BR />- all APs are found and updated<BR />- Only the devices connected with a cable are then found (root AP).</P><P>- All others were briefly displayed as mesh APs, then no longer active.</P><P>Multiple resets of an AP to factory settings (longer than 8 seconds)  is displayed again with the same name as before after reconnection (with and without cable)</P> Mon, 30 Sep 2024 12:24:08 GMT SkySystems 2024-09-30T12:24:08Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Zonedirktor-1200-After-RMA-replacing-mesh-ap-s-no-longer-works/m-p/97975#M15774 <P>Hello, we have the following problem:</P><P>New ZoneDirector basic adjustment, firmware update to 10.5.1.0.276, last backup from the old device imported</P><P>- ZD connected to the old hotel location<BR />- all APs are found and updated<BR />- Only the devices connected with a cable are then found (root AP).</P><P>- All others were briefly displayed as mesh APs, then no longer active.</P><P>Multiple resets of an AP to factory settings (longer than 8 seconds)  is displayed again with the same name as before after reconnection (with and without cable)</P> Mon, 30 Sep 2024 12:24:08 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Zonedirktor-1200-After-RMA-replacing-mesh-ap-s-no-longer-works/m-p/97975#M15774 SkySystems 2024-09-30T12:24:08Z