topic 100.1.0.0.432 Release Notes in Access Points - Indoor and Outdoor

100.1.0.0.432 Release Notes

adamchal — Tue, 10 Nov 2015 23:22:56 GMT

I cannot seem to find any release notes for the Standalone AP Software 100.1.0.0.432 (Indoor APs). I’m trying to update my R700 in standalone mode, but want to read the release notes first. I’m hoping the update addresses my ongoing issues with sudden reboots and an older issue that still persists with the default value for

get directed-thr wlan8

causing 5G clients not being able to see (ping) each other after more than 10 or so clients connect. My current workaround is to set the threshold much higher:

set directed-thr wlan8 100

If anyone can point me in the right direction of the release notes for v 100.1.0.0.432, I’d appreciate it. Thanks!

Re: 100.1.0.0.432 Release Notes

michael_brado — Tue, 10 Nov 2015 23:40:39 GMT

AP firmware 100.1.0.0.432 is associated with ZoneFlex 9.12.1 MR release, and incorporates the fixes described in the 9.12.1 Release Notes:
https://support.ruckuswireless.com/documents/856-zoneflex-9-12-1-mr-refresh-release-notes

Ruckus has just posted ZoneFlex version 9.12.1.0.148 MR Refresh for ZD1200/ZD3000/ZD5000,

MIBs, Standalone AP firmware 100.1.0.0.432, and R710 firmware 100.2.0.0.148.

See the 9.12.1 MR Refresh release notes at:

https://support.ruckuswireless.com/documents/856-zoneflex-9-12-1-mr-refresh-release-notes

Fixes and enhancements include Zero-IT for Win10 clients, IPv6 proxy ARP,

R710 performance under heavy multicast/broadcast, 192.168.50.0 subnet use,

and Eth port issues with R500/R600/T300.

Re: 100.1.0.0.432 Release Notes

adamchal — Wed, 11 Nov 2015 00:58:04 GMT

Thanks for the info Michael!