https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/H320-R320-enter-recover-me-mode/m-p/97440#M15743 <P>i have 2x Smartzone 100 controller and 60x H320 and 20x R320, the problem is all access point added to controller receive configuration apply it then heartbeat lost and after 5 minute it disconnect and the SSID changed to recover me.</P><P>Controller and AP in the same Vlan</P><P>Controllers have static IP and APs take the IP from DHCP in core switch</P><P>HELP</P> Sun, 15 Sep 2024 09:59:58 GMT AlharaziIbrahim 2024-09-15T09:59:58Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/H320-R320-enter-recover-me-mode/m-p/97440#M15743 <P>i have 2x Smartzone 100 controller and 60x H320 and 20x R320, the problem is all access point added to controller receive configuration apply it then heartbeat lost and after 5 minute it disconnect and the SSID changed to recover me.</P><P>Controller and AP in the same Vlan</P><P>Controllers have static IP and APs take the IP from DHCP in core switch</P><P>HELP</P> Sun, 15 Sep 2024 09:59:58 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/H320-R320-enter-recover-me-mode/m-p/97440#M15743 AlharaziIbrahim 2024-09-15T09:59:58Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/H320-R320-enter-recover-me-mode/m-p/97447#M15744 <P>So it turn out that when i change the Vlan management from the default (1) in configuration to the Vlan i make (60) all APs disconnect but after i change back to default all connect again, i want to mention that it actuly in vlan 60 as all APs and controllers ports in switch configure as Vlan 60 and if someone connect to port in switch and the port in Vlan 1 he cant access any APs or controllers.</P><P>just update maybe someone face same problem find this page&nbsp; &nbsp; &nbsp;</P> Sun, 15 Sep 2024 13:35:56 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/H320-R320-enter-recover-me-mode/m-p/97447#M15744 AlharaziIbrahim 2024-09-15T13:35:56Z