topic Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti in Access Points - Indoor and Outdoor

R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

dane_pangilinan — Thu, 29 Dec 2016 04:29:08 GMT

Hello there. I'm having problem with my ZoneFlex R500. I can't find a way to access my WLAN Features, i.e. Change SSID, Enable Wireless Status. And under "Status>Device" there's an error that saying:
"This AP is currently unable to provide wireless access.
To resolve, connect to a Ruckus Controller.
To function as a standalone AP, go to Ruckus Support, navigate to the specific AP and download"

Please help me.

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

mitchell_axtell — Thu, 29 Dec 2016 05:21:44 GMT

What firmware is it running? If it's a 9.x release that's 9.9+, then it's a ZD-only firmware and need to be updated to a 100.x release to function as a standalone. That can be done by downloading the release from the support portal, or possibly hard-resetting via the button.

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

martin_martin — Thu, 29 Dec 2016 11:23:19 GMT

HI Dane
Your AP is currently managed by an controller, at least that is what it thinks.
If you had it connected to a ZD you can just factory reset it and configure the device then as standalone.
If the AP was connected to a vSZ/SZ/SCG then you will need to load 10x.x.x.x software on it to run in standalone mode.

Kind regards
Martin

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

dane_pangilinan — Tue, 03 Jan 2017 00:45:08 GMT

I've done resetting it for more than 4x. But my firmware is still 9.9.

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

dane_pangilinan — Tue, 03 Jan 2017 00:47:25 GMT

Can I upgrade it to 100 via FTP? From Maintenance>Upgrade>Upgrade Method: FTP>Perform Upgrade?

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

michael_brado — Tue, 03 Jan 2017 17:34:55 GMT

Sorry Dane, no auto upgrade FTP services. You can use the 'Local' file method, if you download
the R500's solo AP firmware from this link:
https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

dane_pangilinan — Wed, 04 Jan 2017 01:40:44 GMT

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

oliver_leseur — Sun, 16 Apr 2017 02:39:22 GMT

I have the same issue with an H500. It was provisioned for a ZD and now it reads the same error. I have tried resetting it, loading this firmware: Release_100.1.0.0.194_All_AP_Images and the one you suggested: Release 100.4.0.0.1347 (Solo AP). Both came back with an error: "bad firmware header magic". Any ideas as to why this is happening?

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

andres_flores — Tue, 30 Mar 2021 21:35:56 GMT

im having the same problem, please help me

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti

ithelpdesk_isou — Thu, 14 Mar 2024 02:56:23 GMT

5.2.2.0.2104

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti

ithelpdesk_isou — Thu, 14 Mar 2024 03:06:17 GMT

We have to run that Aps on VSzone only. Till yesterday all APS were running. which is now an offline show

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti

mAXOU92 — Fri, 19 Jul 2024 22:04:50 GMT

Hello,
I have a probleme for my Ruckus R550
I don't found the solution.
The error message is:

This AP is currently unable to provide wireless access.
To resolve, connect to a Ruckus Controller.
To function as a standalone AP, go to Ruckus Support, navigate to the specific AP and download

topic Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti in Access Points - Indoor and Outdoor

R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Settings

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti

Re: R500 Shows "This AP is currently unable to provide wireless access" and No WLAN Setti

This AP is currently unable to provide wireless access.To resolve, connect to a Ruckus Controller.To function as a standalone AP, go to Ruckus Support, navigate to the specific AP and download

This AP is currently unable to provide wireless access.
To resolve, connect to a Ruckus Controller.
To function as a standalone AP, go to Ruckus Support, navigate to the specific AP and download