https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAN-2-on-T610/m-p/81360#M15042 <P>I am trying to daisy chain an Axis camera to a T610 in mesh mode.&nbsp; I am trunking four VLANs to the Root Mesh AP (one management, two for wireless, and one for LAN2).&nbsp; I see both AP MAC addresses in my switch for the management and LAN2 VLANs.</P><P>For the T610 in mesh mode, LAN2 is on, set to Access Port, Default WAN, and my VLAN untag ID is properly configured.&nbsp; I've tried it configured as Local Subnet (LAN) and it still doesn't work.&nbsp; I've also tried User Side Port and that doesn't help.</P><P>Any ideas on how to get LAN2 properly passing traffic?</P> Mon, 17 Jun 2024 19:00:42 GMT Ashland_Fiber 2024-06-17T19:00:42Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAN-2-on-T610/m-p/81360#M15042 <P>I am trying to daisy chain an Axis camera to a T610 in mesh mode.&nbsp; I am trunking four VLANs to the Root Mesh AP (one management, two for wireless, and one for LAN2).&nbsp; I see both AP MAC addresses in my switch for the management and LAN2 VLANs.</P><P>For the T610 in mesh mode, LAN2 is on, set to Access Port, Default WAN, and my VLAN untag ID is properly configured.&nbsp; I've tried it configured as Local Subnet (LAN) and it still doesn't work.&nbsp; I've also tried User Side Port and that doesn't help.</P><P>Any ideas on how to get LAN2 properly passing traffic?</P> Mon, 17 Jun 2024 19:00:42 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAN-2-on-T610/m-p/81360#M15042 Ashland_Fiber 2024-06-17T19:00:42Z