https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/installing-a-new-T350-to-an-existing-unleased-network-with-two/m-p/80549#M15006 <P>I just purchased a T350 ap to add to my existing unleased network with two R510 AP.&nbsp; I plugged the new AP into the existing ruckus poe switch and lights are as follows:&nbsp; PWR - solid green, CTL - blinking green, AIR / 2.4G / 5G all off.</P><P>When I login to my existing ruckus unleased dashboard it is only showing my two existing AP.&nbsp; I was told the new AP has to be on the same firmware as the existing network, so I tried logging into the new AP using confirgure.me-2F5710, my understanding is it should not ask for a password, however it is asking and preventing me from logging in.&nbsp;&nbsp;</P><P>Any advice would be appreciated.</P><P>Thanks, Jimmy&nbsp;</P> Thu, 30 May 2024 02:45:15 GMT jimmy1559 2024-05-30T02:45:15Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/installing-a-new-T350-to-an-existing-unleased-network-with-two/m-p/80549#M15006 <P>I just purchased a T350 ap to add to my existing unleased network with two R510 AP.&nbsp; I plugged the new AP into the existing ruckus poe switch and lights are as follows:&nbsp; PWR - solid green, CTL - blinking green, AIR / 2.4G / 5G all off.</P><P>When I login to my existing ruckus unleased dashboard it is only showing my two existing AP.&nbsp; I was told the new AP has to be on the same firmware as the existing network, so I tried logging into the new AP using confirgure.me-2F5710, my understanding is it should not ask for a password, however it is asking and preventing me from logging in.&nbsp;&nbsp;</P><P>Any advice would be appreciated.</P><P>Thanks, Jimmy&nbsp;</P> Thu, 30 May 2024 02:45:15 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/installing-a-new-T350-to-an-existing-unleased-network-with-two/m-p/80549#M15006 jimmy1559 2024-05-30T02:45:15Z