topic Re: Passthrough on LAN2 port for R710 ? in Access Points - Indoor and Outdoor

Passthrough on LAN2 port for R710 ?

myth_os — Fri, 06 May 2016 00:01:26 GMT

I am trying to use LAN2 to supply wired access to a another device i.e a switch or workstation/printer

This is possible with other brand APs, does it not work with ruckus?

In a few scenerios you can do something like

Main Bldg Mesh AP-----------------Remote Bldg Mesh AP->Switch (or device)

Only time I was able to get link out of LAN2 port was while it was booting, i've tried a straight cable as well as a crossover cable

Re: Passthrough on LAN2 port for R710 ?

mark_anthony_sa — Fri, 06 May 2016 05:42:18 GMT

Configure LAN2 with Access VLAN or Trunk

Re: Passthrough on LAN2 port for R710 ?

darren_olson_74 — Tue, 12 Jul 2016 12:30:32 GMT

Did you ever get this to work? I have tried all settings for LAN 2 and cannot get a link. Running 9.12.2.0.101

Re: Passthrough on LAN2 port for R710 ?

john_d — Wed, 13 Jul 2016 00:05:11 GMT

Definitely works on my R710 without any settings changes. Possibly a dumb question: Do you have a PoE+ switch and is the AP recognizing it as such (e.g. get power-mode says 802.3AT)?

Without AT mode, the 2nd LAN port is disabled.

Re: Passthrough on LAN2 port for R710 ?

darren_olson_74 — Wed, 13 Jul 2016 14:54:36 GMT

That makes sense, thanks for the reply! It would have taken me awhile to think of that. I will try it with a poe+ switch.

Re: Passthrough on LAN2 port for R710 ?

geoff_woods_1s6 — Fri, 06 Jan 2017 16:20:49 GMT

Does the LAN2 Port work in DC mode? I am using a 12V 2A AC adapter, but cannot enable the LAN2 port.