topic How to convert Ruckus AP to unleashed firmware in Access Points - Indoor and Outdoor https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-convert-Ruckus-AP-to-unleashed-firmware/m-p/78245#M14795 <P>Hi, I am encountering a problem when using RUCKUS one. When I tried to add a R510 AP onto RUCKUS one, it could be successful to add, however the status showed "<SPAN>Never contacted cloud". I found that it is needed for the AP to upgrade to unleashed firmware in order for it to contact cloud. The R510 currently have a firmware version&nbsp; 9.13.3.0.41. And I could not find any path for me to upgrade from 9.x.x.x to 200.x.x.x. May I know if there are any path for me to upgrade? Is it needed to upgrade to 110.x.x.x standalone version first and then to 200.x.x.x version? Thanks.</SPAN></P> Thu, 18 Apr 2024 04:11:23 GMT guna 2024-04-18T04:11:23Z How to convert Ruckus AP to unleashed firmware https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-convert-Ruckus-AP-to-unleashed-firmware/m-p/78245#M14795 <P>Hi, I am encountering a problem when using RUCKUS one. When I tried to add a R510 AP onto RUCKUS one, it could be successful to add, however the status showed "<SPAN>Never contacted cloud". I found that it is needed for the AP to upgrade to unleashed firmware in order for it to contact cloud. The R510 currently have a firmware version&nbsp; 9.13.3.0.41. And I could not find any path for me to upgrade from 9.x.x.x to 200.x.x.x. May I know if there are any path for me to upgrade? Is it needed to upgrade to 110.x.x.x standalone version first and then to 200.x.x.x version? Thanks.</SPAN></P> Thu, 18 Apr 2024 04:11:23 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-convert-Ruckus-AP-to-unleashed-firmware/m-p/78245#M14795 guna 2024-04-18T04:11:23Z Re: How to convert Ruckus AP to unleashed firmware https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-convert-Ruckus-AP-to-unleashed-firmware/m-p/78249#M14796 <P>You can't upgrade your unsigned 9.13 firmware directly to fully signed (FSI) Unleashed firmware.</P><P>You'll need to upgrade first to an intermediate signed (ISI) firmware, e.g. Solo 104 or 106. Then you can install the latest Unleashed firmware.</P> Thu, 18 Apr 2024 06:14:08 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-convert-Ruckus-AP-to-unleashed-firmware/m-p/78249#M14796 ms264556 2024-04-18T06:14:08Z