topic Re: New R710 deployment problems with HP Switches entering POE+ 802.3at mode in Access Points - Indoor and Outdoor

New R710 deployment problems with HP Switches entering POE+ 802.3at mode

josh_hymer — Mon, 09 Nov 2015 17:44:46 GMT

All of our ruckus APs (R710s) are in 802.3af mode. Every AP is connected to a POE+ port on our 5412zl switches (Capable of 37 watts per port). In CLI on our ZD3000 we have set the lldp enable in the System Default group. Anyone else seeing this issue? Thank you!

Re: New R710 deployment problems with HP Switches entering POE+ 802.3at mode

sergiy_oliynyk — Mon, 09 Nov 2015 19:08:41 GMT

Check POE limits on HP, worked for my R710's:

Re: New R710 deployment problems with HP Switches entering POE+ 802.3at mode

michael_brado — Tue, 10 Nov 2015 17:54:05 GMT

Is LLDP also configured on the switch ports?

https://support.ruckuswireless.com/answers/000005005

Re: New R710 deployment problems with HP Switches entering POE+ 802.3at mode

seanmuir — Fri, 13 Nov 2015 23:51:02 GMT

Why cant knowledge articles make it in to the manuals 🙂

Re: New R710 deployment problems with HP Switches entering POE+ 802.3at mode

sergiy_oliynyk — Fri, 13 Nov 2015 23:55:07 GMT

On HP-2920 LLDP is enabled by default... For the rest on config i used this KB:
https://www.juniper.net/techpubs/en_US/release-independent/nce/information-products/pathway-pages/nc...

Re: New R710 deployment problems with HP Switches entering POE+ 802.3at mode

michael_harris_ — Sat, 30 Jan 2016 04:51:17 GMT

Does not work with Cisco SG300 switches. I heard today that there is an AP Command to force 802.3at request from AP.

Stay tuned