https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/AP-not-working-properly/m-p/77270#M14741 <P>I have a problem with an AP, my AP receives an address from the dhcp but does not provide one to the client who connects to it.</P><P>even weirder, if I set an ip fix to the client they don't go through the AP no network</P><P>my conf:</P><P>zone director gives the conf to my APs, vlan 25 is set on my zone director, my ap is on vlan 25, it receives the conf from the zone director, it broadcasts the SSID, you can connect to it but nothing passes through and it doesn't give the ip to the customers.</P><P>do you have any idea what could be going on?</P><P>I'd like to point out that all our terminals work very well in this way in many other places, and that I've tried a number of terminals that behave in the same way.</P> Fri, 22 Mar 2024 10:40:59 GMT se69 2024-03-22T10:40:59Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/AP-not-working-properly/m-p/77270#M14741 <P>I have a problem with an AP, my AP receives an address from the dhcp but does not provide one to the client who connects to it.</P><P>even weirder, if I set an ip fix to the client they don't go through the AP no network</P><P>my conf:</P><P>zone director gives the conf to my APs, vlan 25 is set on my zone director, my ap is on vlan 25, it receives the conf from the zone director, it broadcasts the SSID, you can connect to it but nothing passes through and it doesn't give the ip to the customers.</P><P>do you have any idea what could be going on?</P><P>I'd like to point out that all our terminals work very well in this way in many other places, and that I've tried a number of terminals that behave in the same way.</P> Fri, 22 Mar 2024 10:40:59 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/AP-not-working-properly/m-p/77270#M14741 se69 2024-03-22T10:40:59Z