https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/WPA-Settings-for-Ruckus-R710-Unleashed-for-iPhone-iPad/m-p/74992#M14558 <P>I have a Ruckus R710 AP running unleashed firmware 200.15 and can only connect iOS devices to WiFi manually by dialing in the IP address, etc. I assume this is a WPA/DHCP issue but can’t find any info on what settings to change in the UI to allow iOS devices to connect automatically. Laptops and desktops connect fine, including Apple. Any help would be appreciated.&nbsp;</P> Tue, 23 Jan 2024 16:52:27 GMT ardpub 2024-01-23T16:52:27Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/WPA-Settings-for-Ruckus-R710-Unleashed-for-iPhone-iPad/m-p/74992#M14558 <P>I have a Ruckus R710 AP running unleashed firmware 200.15 and can only connect iOS devices to WiFi manually by dialing in the IP address, etc. I assume this is a WPA/DHCP issue but can’t find any info on what settings to change in the UI to allow iOS devices to connect automatically. Laptops and desktops connect fine, including Apple. Any help would be appreciated.&nbsp;</P> Tue, 23 Jan 2024 16:52:27 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/WPA-Settings-for-Ruckus-R710-Unleashed-for-iPhone-iPad/m-p/74992#M14558 ardpub 2024-01-23T16:52:27Z