topic Re: Setting up a L2/MAC access control in Access Points - Indoor and Outdoor

Setting up a L2/MAC access control

bdillard — Thu, 07 Dec 2023 18:01:59 GMT

Hello,

I have a bunch of 550's - no zone director, not ruckus firewall - just an unleashed network - latest version firmware.

I had set up a mac address restriction a long time ago and forgot the steps. I have the mac address of every phone, laptop and ipad we will allow on the network.

I went to Services, access control, L2/Mac Address and input the mac address for a test unit. I set it for only allow the stations listed below.

I wennt to device access policy and created a policy that says deny all by default.

I don't know the next steps because currently everything still works.

Re: Setting up a L2/MAC access control

bdillard — Thu, 07 Dec 2023 22:49:53 GMT

Please disregard - I believe the person testing, tested before the rule was in place. I think it is working fine.

Re: Setting up a L2/MAC access control

syamantakomer — Tue, 12 Dec 2023 18:26:30 GMT

Hello @bdillard,

Glad to know that it is working fine.