topic Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610 in Access Points - Indoor and Outdoor

How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

pajri_oktara — Wed, 10 Jul 2019 06:10:29 GMT

How do I set the client to a maximum of 250 clients? I have set the menu priority but the client can only reach 100 clients in the original?

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

veno77 — Thu, 11 Jul 2019 08:50:35 GMT

What controller are you using? Unleashed?

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

pajri_oktara — Mon, 22 Jul 2019 06:39:07 GMT

yeah unleashed

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

veno77 — Mon, 22 Jul 2019 07:00:42 GMT

Go To AP Group config - Other, find the AP model and set the desired max clients, be careful not to exceed the limit supported by the AP itself. Click Finish.

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

pajri_oktara — Mon, 22 Jul 2019 08:14:29 GMT

already done but still stuck in 100 clients :(((

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

veno77 — Mon, 22 Jul 2019 08:15:28 GMT

In this case, if you have valid support contract open a TAC case with the support.

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

JacksonCampbell — Wed, 05 Jul 2023 00:39:29 GMT

I'm having this same issue. Updated all the max clients to 200, but it still says 100 under each AP.

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

Amith — Wed, 05 Jul 2023 11:06:49 GMT

Hi @JacksonCampbell,

Please let me know if the AP is connected to the Zone Director or the SZ/vSZ.

On the ZoneDirector, we have the option to configure the MAX-allowed clients option under the Model Specific Config.

Login to the ZD GUI.

Navigate to Configure ==> Access Points.

Under the Access Points group click on the Edit for the specific AP group. Below you can increase the Max clients associated with the AP.

Max Clients: Allow Maxclients to associate with this AP

We do not have an option from AP groups on the vSZ similar to ZD, a Feature Request is already in place.

You can find the same in the below article:

https://support.ruckuswireless.com/articles/000011255

Thank you!
Amith

Re: How do I set the client to a maximum of 250 clients? Ruckus ZoneFlex R610

JacksonCampbell — Wed, 05 Jul 2023 21:33:53 GMT

It's on Unleashed. Regardless, as I said, I configured the WLAN to allow 200 clients/radio and I set the APs to be 200 clients/AP, but the AP info still says max clients 100, so there is a bug in Unleashed. Also, the CLI refuses to go into WLAN config mode, so there seems to be a bug there too.