https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cant-connect-to-admin-menu-on-my-R650/m-p/61444#M13832 <P>I am trying to convert a new purchase R650 to Unleashed.&nbsp; However when I connect to the AP directky via ethernet I cannot reach 192.168.0.1.&nbsp; I even tried IP sniffing to find the APs IP address but it does not show one.&nbsp; The AP is powered and the CLT light is blinking.&nbsp; It is almost as if there is no firmware on the AP.</P> Fri, 23 Jun 2023 17:47:00 GMT Murph972 2023-06-23T17:47:00Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cant-connect-to-admin-menu-on-my-R650/m-p/61444#M13832 <P>I am trying to convert a new purchase R650 to Unleashed.&nbsp; However when I connect to the AP directky via ethernet I cannot reach 192.168.0.1.&nbsp; I even tried IP sniffing to find the APs IP address but it does not show one.&nbsp; The AP is powered and the CLT light is blinking.&nbsp; It is almost as if there is no firmware on the AP.</P> Fri, 23 Jun 2023 17:47:00 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cant-connect-to-admin-menu-on-my-R650/m-p/61444#M13832 Murph972 2023-06-23T17:47:00Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cant-connect-to-admin-menu-on-my-R650/m-p/61485#M13833 <P>Hi&nbsp;<a href="https://community.ruckuswireless.com/t5/user/viewprofilepage/user-id/18960">@Murph972</a>&nbsp;<BR /><BR />Can you try doing a Factory reset on the AP by pressing the reset for more than 10 seconds?<BR />This will ensure to remove any configuration on the AP and reset it to default settings including the IP.<BR /><BR />Once done, then try to ping the IP address. and then you can connect to the AP on the GUI.</P> Sat, 24 Jun 2023 08:03:43 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cant-connect-to-admin-menu-on-my-R650/m-p/61485#M13833 sanjay_kumar 2023-06-24T08:03:43Z