https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R720/m-p/58626#M13736 <P>If the PoE injector does not tell the AP via LLDP, the R720 assumes its underpowered. You can set power mode to 802.11bt via CLI.</P> Fri, 12 May 2023 14:18:00 GMT Wouter 2023-05-12T14:18:00Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R720/m-p/58597#M13732 <P>Added a new R720 AP to my backyard, 150 ft cat 6 cable coming from my switch, when I log onto my laptop and link to all 3 AP the r720 and the two r510 (in the house) the r720 which is outside shows under powered, I used a 60watt amplifier injector but did not help. Any ideas?</P> Thu, 11 May 2023 17:57:06 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R720/m-p/58597#M13732 Omnf051 2023-05-11T17:57:06Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R720/m-p/58626#M13736 <P>If the PoE injector does not tell the AP via LLDP, the R720 assumes its underpowered. You can set power mode to 802.11bt via CLI.</P> Fri, 12 May 2023 14:18:00 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R720/m-p/58626#M13736 Wouter 2023-05-12T14:18:00Z