topic Re: Old WinCE clients on T300 with later firmware in Access Points - Indoor and Outdoor

Old WinCE clients on T300 with later firmware

bruce_richardso — Tue, 04 Oct 2022 10:39:22 GMT

Hi,

I have had this issue for a while, after upgrading to a later version of the firmware. Older WinCE clients on 2.4GHz seem to drop off the network and do not come back. This only seems to affect T300 APs, that's the only outdoor APs we have. Our indoor APs (R650 etc) seem not to be affected. The clients are barcode scanners with Sumit WiFi cards that are old but not likely to be replaced very soon.

5.2.1.0.1038 seems to be OK. But anything later causes problems.

Is this a know issue?

Thanks

Bruce

Re: Old WinCE clients on T300 with later firmware

Parik_MN — Tue, 04 Oct 2022 11:39:04 GMT

Hello @bruce_richardso,

The symptoms sounds like a known issue in firmware 5.2.2. We already have a fix build to address that issue. Please feel free to report a case. We would share the fix build with you.

Regards,

Parik

Re: Old WinCE clients on T300 with later firmware

bruce_richardso — Tue, 04 Oct 2022 12:13:45 GMT

Thanks Parik, I will open a case

Re: Old WinCE clients on T300 with later firmware

bruce_richardso — Tue, 04 Oct 2022 12:19:29 GMT

topic Re: Old WinCE clients on T300 with later firmware in Access Points - Indoor and Outdoor

Old WinCE clients on T300 with later firmware

Re: Old WinCE clients on T300 with later firmware

Re: Old WinCE clients on T300 with later firmware

Re: Old WinCE clients on T300 with later firmware

Case ID: 01391410