topic how to change the ap firmware in Access Points - Indoor and Outdoor

how to change the ap firmware

ben_leung — Wed, 28 Sep 2022 03:42:15 GMT

1. how to change the R550 firmware from unleashed to vSZ.

2. how to change the H550 firmware from vSZ to unleashed.

Re: how to change the ap firmware

sanjay_kumar — Wed, 28 Sep 2022 03:52:59 GMT

Hi @ben_leung

In both the case, you first need to upgrade the APs from controller managed firmware to standalone version 110.x or 114.x.
Upgrade either by doing a factory reset or via CLI.
once done, you can connect the AP to vSZ\Unleashed network by setting the controller ip from GUI or via cli.

Re: how to change the ap firmware

sanjay_kumar — Wed, 28 Sep 2022 03:58:01 GMT

Hi @ben_leung
Below is the commands if you want to upgrade the APs via CLI using the TFTP.
fw set host <tftp ip address>
fw set control <control file name>
fw set proto <tftp>
fw update