PoE injector not powering R300

roy_jorolan — Mon, 26 Sep 2022 06:57:12 GMT

Why is it that Power Injectors cannot power R300 APs(two of which), however it will Power on using a Power Adapter?

PoE is good since it can power other model like R510, R610 APs so there is no problem with the PoE.

Re: PoE injector not powering R300

Vineet_nejwala — Tue, 27 Sep 2022 03:44:31 GMT

All 802.3AF/802.3AT compatible power injectors can be used to power up the unit. The unit POE port might be bad and you should try to check the APs RMA support.

The power requirements of the R300 AP are as below:

• DC Input
• Idle: 1.6W
• Typical: 3.6W
• Peak: 8.4W
• Power over Ethernet Input
• Idle: 3.4W
• Typical: 5.3W
• Peak: 9.7W

Best Regards

Vineet

topic Re: PoE injector not powering R300 in Access Points - Indoor and Outdoor

PoE injector not powering R300

Re: PoE injector not powering R300