Ethernet Issues on P300

jinteg — Sun, 29 May 2022 03:45:11 GMT

Hello,

I have two APs connected as a bridge. The local side works great, but once or twice a week the remote side appears to stop communicating on the ethernet port. I can still remotely control the remote AP since it's connected via WiFi, but I can't communicate with anything that is connected to the ethernet port on that AP until I either reboot it or enable/disable the ethernet interface. In the web interface the ethernet port shows that it's connected, but there are no ARP entries for ethernet. I see the following entries in the logs, though I'm not sure if this is helpful:

Nov 5 20:03:21 RuckusWB daemon.notice meshd[730]: uplink(wired=0)=70:00:00:00:30:00(650.0) best_wired=null(0.0) proposed=null( ,0.0,0.0)
Nov 5 20:03:24 RuckusWB user.warn kernel: eth0 athr_gmac_tx_timeout
Nov 5 20:03:29 RuckusWB user.warn kernel: eth0 athr_gmac_tx_timeout
Nov 5 20:03:34 RuckusWB user.warn kernel: eth0 athr_gmac_tx_timeout

Any help is greatly appreciated. Thank you

Re: Ethernet Issues on P300

Vineet_nejwala — Sun, 29 May 2022 06:31:02 GMT

@jinteg

Can you attach the support log from the AP in question when issue occurs ?

Best Regards

Vineet

Re: Ethernet Issues on P300

jlocke — Wed, 13 Jul 2022 18:27:14 GMT

I am having a similar issue, was this issue ever resolved?

topic Ethernet Issues on P300 in Access Points - Indoor and Outdoor

Ethernet Issues on P300

Re: Ethernet Issues on P300

Re: Ethernet Issues on P300