topic Re: ZF7982 Change Manage controller to Standalone AP in Access Points - Indoor and Outdoor

ZF7982 Change Manage controller to Standalone AP

Radhika — Thu, 26 May 2022 06:33:10 GMT

Dear Team,

Please provide the solution how to change ZF 7982 Managed controller to Standalone AP for personal use.

current Software

Software Version: 10.1.1.0.26

Please provide the solution and links of software version.

while upgrading the firmware error

Upgrade/Downgrade from FSI to UI is not allowed.

Vineet_nejwala — Thu, 26 May 2022 08:32:00 GMT

1) Perform a f/d on this AP by CLI or physical reset button.

rkscli: set factory

On the AP back console using paper clip, press hold the button which says "Hard Reset" within a tiny circular port for about 10 to 12 seconds.

2) Download this bundled image and extract 104 image for ZF7982

3) Upgrade using CLI or WEB :

If the issue persist share below output from AP CLI :

fw show
fw show all
get version

Best Regards

Vineet

Radhika — Sat, 28 May 2022 11:05:23 GMT

Hi,

Thanks for your support no its working Standalone AP.