topic Re: Downgrade R610 in Access Points - Indoor and Outdoor

Downgrade R610

Andreemig — Thu, 26 May 2022 15:09:58 GMT

How to downgrade R610 from 10.5.1.0.176 to 9.8.3.0.14 for use with ZD1200?

Re: Downgrade R610

DarrelRhodes — Thu, 26 May 2022 15:13:28 GMT

The R610 AP isn't supported in any ZD firmware preceding version 9.13. This will be the minimum version you can run on the Zone Director with this AP connected.

Hope that helps,
Darrel.

Re: Downgrade R610

Vineet_nejwala — Fri, 27 May 2022 01:52:08 GMT

@Andreemig

Since R610 is supported from 9.13.x code you can't downgrade it. You can check below link which will take you to ZD document and you can validate in release note of 9.13 version about the supported AP model. You can then compare all your existing AP model are supported in which code and accordingly decide to upgrade.

https://support.ruckuswireless.com/products/73-zonedirector-1200?open=document#sort=relevancy&f:@source=[Documentation]&f:@commonproducts=[ZD1200]

Best Regards

Vineet

Re: Downgrade R610

Andreemig — Fri, 27 May 2022 12:47:38 GMT

I'm trying to download version 9.13 and 10.0, but it says it needs to be premium. Is there any other way to download these versions?

Version 10.1.x I can download normally.

Thanks.

Re: Downgrade R610

Vineet_nejwala — Fri, 27 May 2022 13:50:03 GMT

@Andreemig

There are certain images/File available only for Premium User (one who has active/valid support contract). You also need an active support on controller to upgrade it so I would suggest to check your controller active support via Ruckus admin team.

Best Regards

Vineet