topic is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG? in Access Points - Indoor and Outdoor

is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

pasan_jayarathn — Mon, 12 Mar 2018 10:17:38 GMT

is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

Re: is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

anoshan_elalasi — Mon, 12 Mar 2018 11:13:56 GMT

Yes...you can configure
Try "set snmp" and press "tab" and find tge available option

Re: is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

stephen_hall_60 — Tue, 07 Aug 2018 20:38:15 GMT

not sure why, but this does not show you how to ENABLE snmp (only set the options) , tried set snmp enable   or enabled    give output below (ie cmd not found):

Usage: set snmp {options}
                 ->version ,             SNMP version(v2c,v3,both)
                 ->system contact ,      SNMP V2c system contact
                 ->system location ,     SNMP V2c system location
                 ->community ro ,         read-only community name
                 ->community rw ,         read-write community name
                 ->trap {enable|disable},       SNMP V2c trap enable flag
                 ->trap-svr ,           SNMP V2c trap server ipaddr

rkscli: get snmp
SNMP   enable             : disable
SNMP   version            : v2c and v3
SNMPv2 ro community       : public
SNMPv2 rw community       : private
SNMPv2 sys contact        : https://support.ruckuswireless.com/contact_us
SNMPv2 sys location       : 'xxxx'
SNMPv2 trap enable        : enable
SNMPv2 trap server        :
SNMPv2 trap/inform

rkscli: set snmp enable Sorry, no match to set snmp enable found

rkscli: set snmp up
Usage: set snmp {options}
                 ->version

Re: is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

mitchell_axtell — Wed, 08 Aug 2018 02:12:34 GMT

You want "set remote-mgmt snmp"

Re: is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

ankit_singh_5sr — Tue, 16 Jul 2019 07:20:33 GMT

any body have a knowledge of snmp v3 on rukus ap please upload

Re: is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

brett_hanson — Fri, 10 May 2024 02:50:39 GMT

This was a pain to work out for me, so here it is for anyone else who lands here.
Note: remove the {} when entering stuff, this is just to imply it is variable data of your choosing.

set remote-mgmt snmp
set snmp version v2c
set snmp community ro {snmp_ro_community_string}
set snmp community rw {snmp_rw_community_string}
set snmp system contact "{contact information}"
set snmp system location "{location information}"

After each command, you should see OK - if you don’t see this, the command was not successfully applied.

You can confirm your settings afterwards with
get snmp

Note that you should set community rw as it defaults to ruckusrw if you don't set it.

By example:
set remote-mgmt snmp
set snmp version v2c
set snmp community ro SomeRandomRoSNMPCommunity
set snmp community rw SomeRandomRWSNMPCommunity
set snmp system contact "Your favourite IT support company, name blah, phone blah"
set snmp system location "75 Wherever Highway, StateX CountryY 65059"