topic ZoneFlex 7055 DHCP configuration in Access Points - Indoor and Outdoor

ZoneFlex 7055 DHCP configuration

hansaja — Tue, 10 Feb 2015 10:47:51 GMT

I have a ZoneFlex 7055 Access point and I need to create a DHCP server on it. How can I issue the default gateway of the Vlan other than the AP ip address as the default gateway for users? Also I need to know how to issue internal DNS servers to the users. Can someone help on this?

Re: ZoneFlex 7055 DHCP configuration

michael_brado — Tue, 10 Feb 2015 22:47:15 GMT

Hello Tuck,

You can define a local subnet on a different VLAN than the AP is using, and
provide DHCP for that VLAN. The AP does need an IP in that VLAN and is the
default-gateway for DHCP clients onto the wire (Local Subnet NAT and bridge
to WAN). DNS is not configured on the AP, but requests will hit the client VLAN.

See details starting on page 114 of the 9.8 AP User Guide.

https://support.ruckuswireless.com/do...

Re: ZoneFlex 7055 DHCP configuration

munish_munish — Wed, 11 Feb 2015 11:49:09 GMT

HI Tuck ,

Up to four IP subnets can be configured per AP, each with its own address range
which cannot conflict with one another.
1 Go to Configuration > Local Subnets. The four tabs at the top (Local Subnet
1 - 4) allow you to configure each of the four subnets independently.

Re: ZoneFlex 7055 DHCP configuration

hansaja — Wed, 18 Feb 2015 14:10:47 GMT

Thank you very much 🙂

Re: ZoneFlex 7055 DHCP configuration

hansaja — Wed, 18 Feb 2015 14:11:05 GMT

Thank you very much 🙂

Re: ZoneFlex 7055 DHCP configuration

hansaja — Wed, 18 Feb 2015 14:14:57 GMT

problem solved. I configured DNS inside the AP and issued DHCP by using local Subnet 2. And then I used NAT and sent the users through the ip of the Access point. It's working. I'm sorry I forgot to post some screen shots of the case. However thank you very much for the support guys.. 🙂