https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-Configuration-Update-Failed/m-p/42811#M12239 I found the AP logs and it says the channel I chose is an "illegal channel for llac radio mode" so I know why the updates failed. Wed, 24 Aug 2016 18:54:56 GMT clayton_taverni 2016-08-24T18:54:56Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-Configuration-Update-Failed/m-p/42810#M12238 I am trying to manually set the 5GHz radio channel on 5 different R600 APs and I'm getting "Update Failed" on the controller monitoring page.  I tried rebooting the APs but that didn't get the update to take.  Is there a way to use the CLI to update the AP?  Thanks. Wed, 24 Aug 2016 18:30:13 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-Configuration-Update-Failed/m-p/42810#M12238 clayton_taverni 2016-08-24T18:30:13Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-Configuration-Update-Failed/m-p/42811#M12239 I found the AP logs and it says the channel I chose is an "illegal channel for llac radio mode" so I know why the updates failed. Wed, 24 Aug 2016 18:54:56 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-Configuration-Update-Failed/m-p/42811#M12239 clayton_taverni 2016-08-24T18:54:56Z