<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862 in Access Points - Indoor and Outdoor</title>
    <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42546#M12102</link>
    <description>Hi All,&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;I'm busy deploying a new SZ100 on a site that has a IPTV system.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;The TV's in the rooms connect directly to the AP on Lan2,&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;I have setup the profile under Tunnels and Ports, but i also&amp;nbsp;need to disable igmp snooping and directed multicast. &lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Normally i would use the below commands on a ZD. What would the SZ cli commands be?&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth0 igmp-snooping disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth0 directed multicast disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth1 igmp-snooping disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth1 directed multicast disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Assistance will be hugely appreciated.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;TIA&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Shaun&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;</description>
    <pubDate>Tue, 04 Sep 2018 18:51:54 GMT</pubDate>
    <dc:creator>shaun_strydom</dc:creator>
    <dc:date>2018-09-04T18:51:54Z</dc:date>
    <item>
      <title>untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42546#M12102</link>
      <description>Hi All,&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;I'm busy deploying a new SZ100 on a site that has a IPTV system.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;The TV's in the rooms connect directly to the AP on Lan2,&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;I have setup the profile under Tunnels and Ports, but i also&amp;nbsp;need to disable igmp snooping and directed multicast. &lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Normally i would use the below commands on a ZD. What would the SZ cli commands be?&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth0 igmp-snooping disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth0 directed multicast disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth1 igmp-snooping disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth1 directed multicast disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Assistance will be hugely appreciated.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;TIA&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Shaun&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;</description>
      <pubDate>Tue, 04 Sep 2018 18:51:54 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42546#M12102</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-04T18:51:54Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42547#M12103</link>
      <description>Hi Shaun,&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;qos commands are AP specific and you can use the same commands on all APs. It does not matter if they are managed by a ZD or SZ.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Regards,&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Anusha</description>
      <pubDate>Wed, 05 Sep 2018 01:39:57 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42547#M12103</guid>
      <dc:creator>Anusha_Vemula</dc:creator>
      <dc:date>2018-09-05T01:39:57Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42548#M12104</link>
      <description>How would i run these commands on the SZ to all ap’s or Ap-models. Ive tried going into the sz via ssh, but wasn’t able to figureout how to send this to all the specific models.</description>
      <pubDate>Wed, 05 Sep 2018 04:58:26 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42548#M12104</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T04:58:26Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42549#M12105</link>
      <description>For SZ managed APs, we use the AP CLI script.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Paste the below commands in a notepad and save it in .txt file.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;B alt="" name="" rel="" target="" title="" type="" value=""&gt;Syntax :&lt;/B&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;fw_version= &lt;AP firmware="" version=""&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;model=all&amp;nbsp;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;COMMAND&gt;&amp;nbsp;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;B alt="" name="" rel="" target="" title="" type="" value=""&gt;Example :&lt;/B&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;fw_version=3.6.1.0.354&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;model=all&amp;nbsp;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth0 igmp-snooping disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Upload the file under Administration&amp;gt;Diagnostic &amp;gt; AP CLI script and you can execute the script per zone.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;We cannot run the script on specific AP models as it can be executed only at Zone level. You can keep the same model APs in one Zone and execute the script on it.&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;- Anusha&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;/COMMAND&gt;&lt;/AP&gt;</description>
      <pubDate>Wed, 05 Sep 2018 05:19:07 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42549#M12105</guid>
      <dc:creator>Anusha_Vemula</dc:creator>
      <dc:date>2018-09-05T05:19:07Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42550#M12106</link>
      <description>Thank you. Appreciate the guidances.</description>
      <pubDate>Wed, 05 Sep 2018 05:21:26 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42550#M12106</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T05:21:26Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42551#M12107</link>
      <description>Hi Anusha&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;I'm getting this error when trying to upload the .txt file&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;Unable to upload the AP CLI script to the controller. Reason: com.ruckuswireless.wsg.domain.diagnostics.exception.InvalidAPCLIScriptFileException: Wrong AP script syntax.&lt;BR /&gt;&lt;BR /&gt;Ideas?</description>
      <pubDate>Wed, 05 Sep 2018 08:36:59 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42551#M12107</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T08:36:59Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42552#M12108</link>
      <description>can you post the script info here.&lt;BR /&gt;&lt;BR /&gt;-Anusha</description>
      <pubDate>Wed, 05 Sep 2018 08:38:37 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42552#M12108</guid>
      <dc:creator>Anusha_Vemula</dc:creator>
      <dc:date>2018-09-05T08:38:37Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42553#M12109</link>
      <description>fw_version=3.5.1.0.1010
&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;model=all&lt;/P&gt;
&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;set qos eth0 igmp-snooping disable&lt;/P&gt;&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;/P&gt;&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;The rest of the commands should be&amp;nbsp;&lt;/P&gt;&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;/P&gt;set qos eth0 directed multicast disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth1 igmp-snooping disable&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;set qos eth1 directed multicast disable&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;/P&gt;</description>
      <pubDate>Wed, 05 Sep 2018 08:41:19 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42553#M12109</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T08:41:19Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42554#M12110</link>
      <description>I tried the SZ firmware version and the AP firmware version</description>
      <pubDate>Wed, 05 Sep 2018 08:43:54 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42554#M12110</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T08:43:54Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42555#M12111</link>
      <description>It has to be AP firmware version and there should not be any space between the lines.&lt;BR /&gt;&lt;BR /&gt;-Anusha</description>
      <pubDate>Wed, 05 Sep 2018 09:01:40 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42555#M12111</guid>
      <dc:creator>Anusha_Vemula</dc:creator>
      <dc:date>2018-09-05T09:01:40Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42556#M12112</link>
      <description>I have tried that aswell&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;see below&lt;BR /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;&lt;BR alt="" name="" rel="" target="" title="" type="" value="" /&gt;fw_version=3.5.1.0.1010
&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;model=all&lt;/P&gt;&lt;P alt="" name="" rel="" target="" title="" type="" value=""&gt;set qos eth0 igmp-snooping disable&lt;/P&gt;</description>
      <pubDate>Wed, 05 Sep 2018 09:03:52 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42556#M12112</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T09:03:52Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42557#M12113</link>
      <description>Got it working, My Mac .txt files didnt want to upload. created them on windows and all good.</description>
      <pubDate>Wed, 05 Sep 2018 09:13:47 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42557#M12113</guid>
      <dc:creator>shaun_strydom</dc:creator>
      <dc:date>2018-09-05T09:13:47Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42558#M12114</link>
      <description>Good to hear that.&lt;BR /&gt;&lt;BR /&gt;-Anusha</description>
      <pubDate>Wed, 05 Sep 2018 15:05:10 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42558#M12114</guid>
      <dc:creator>Anusha_Vemula</dc:creator>
      <dc:date>2018-09-05T15:05:10Z</dc:date>
    </item>
    <item>
      <title>Re: untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV 
steaming on SZ100 Firmware Version 3.5.1.0.862</title>
      <link>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42559#M12115</link>
      <description>for reference, here is a link to the Ruckus Hospitality Best Practices Guide for SZ. It includes details of how to disable directed multicast amongst other best practices.&amp;nbsp;&lt;A href="https://ruckuswireless.egnyte.com/dl/LGcbBk7wAP?mkt_tok=eyJpIjoiWmpKbFpEazJOMkV6WlRZeCIsInQiOiJUcUdyWGdPTTR1eTdPVmdKdDBOZ3BVVUQ1a0ZqTE1SVGhOdGtcL3l4XC9DWWg0MzVkbmNYYjlaZmI2QjJjenJXT0ZrOGVzRFNCODNCRTAwVVM1S0VzTExRPT0ifQ%3D%3D" rel="nofollow"&gt;https://ruckuswireless.egnyte.com/dl/LGcbBk7wAP?mkt_tok=eyJpIjoiWmpKbFpEazJOMkV6WlRZeCIsInQiOiJUcUdyWGdPTTR1eTdPVmdKdDBOZ3BVVUQ1a0ZqTE1SVGhOdGtcL3l4XC9DWWg0MzVkbmNYYjlaZmI2QjJjenJXT0ZrOGVzRFNCODNCRTAwVVM1S0VzTExRPT0ifQ%3D%3D&lt;/A&gt;</description>
      <pubDate>Thu, 06 Sep 2018 11:57:47 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/untagged-a-vlan-on-Lan2-for-AP-s-R500-R510-R610-R710-and-R720-s/m-p/42559#M12115</guid>
      <dc:creator>robert_lowe_722</dc:creator>
      <dc:date>2018-09-06T11:57:47Z</dc:date>
    </item>
  </channel>
</rss>

