topic Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients in Access Points - Indoor and Outdoor

How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Wed, 12 Jun 2019 06:18:59 GMT

Dear Master,

I want to ask,
I have ruckus R610 to install in my office. I use the default settings, before I searched the internet that ruckus r610 could be used for 512 clients. but why after 100 clients, the client to 101 cannot connect to ruckus.
how do I set Access Point ruckus r610 so that it can be used by more than 100 clients ???
I did not find it in the admin menu https://unleashed.ruckuswireless.com/admin/dashboard.jsp
I have tried editing on the Access point menu (like the attached picture) but it's still the same.
Please help me 😞

Before edit setting :

After edit setting :

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

michael_brado — Wed, 12 Jun 2019 16:22:46 GMT

Please see KBA-4666: What is the maximum number of clients per AP / Radio by Auth type?
https://support.ruckuswireless.com/articles/000004666
The Authentication/Encryption method on your WLANs can affect maximum number of clients.
This KBA needs updating, but R610 appears to be similar to R600 on radio capabilities.

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Thu, 13 Jun 2019 03:21:25 GMT

I'm cannot access this link : https://support.ruckuswireless.com/articles/000004666
Please help me. how to setting maxium number of clients per AP ? 😞
currently only 100 clients can connect.

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

pasquale_monard — Mon, 17 Jun 2019 20:49:43 GMT

Arie, if you sign up on support.ruckuswireless.com (it's free!) you will be able to access the KBA. I advise you to create an account.

If you want to exceed 100 clients, you have can edit the WLAN - advanced options and in the priority tab under Max Clients change the amount of clients per radio.

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Thu, 20 Jun 2019 08:10:12 GMT

I have registered and when I want to see the article, an error appears as below:

I did not find the WLAN - Advanced menu as you said. when I log in to the dashboard https://unleashed.ruckuswireless.com/admin/dashboard.jsp?privilege=rw it looks like this. on what menu can I find WLAN - Advanced?

Could you help me please ?
@pmonardo @Michael Brado

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Fri, 21 Jun 2019 02:56:16 GMT

Dear pmonardo,

I have signed up, but still can't access the article.

I have also set the WLAN priority on the 512 client, but it still cannot be more than 100 clients connected.

Could you help me please ? 😞

Regards,

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Fri, 21 Jun 2019 07:55:55 GMT

Check max-aid ovia below.

# en
# ap-mode
# get max-aid wlanX

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Fri, 21 Jun 2019 08:22:03 GMT

Where can I check it? my ruckus type is R610

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Fri, 21 Jun 2019 08:23:52 GMT

on cli

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Fri, 21 Jun 2019 08:28:28 GMT

When I run the command # get max-aid wlanX, an error appears as below :

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Fri, 21 Jun 2019 08:29:39 GMT

x is wlan number.

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Fri, 21 Jun 2019 08:30:19 GMT

You can confirm number via "get wlanlist"

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Fri, 21 Jun 2019 08:56:42 GMT

Oh oke, this is the result :

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Fri, 21 Jun 2019 08:57:37 GMT

And what should I do so that more than 100 clients can connect to my ruckus r610?
Please help me, Sir 😞

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Fri, 21 Jun 2019 09:58:24 GMT

So maximal client per AP 256 clients ?

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Fri, 21 Jun 2019 11:21:49 GMT

If you were adjust max client to 512 under Global >Other > Max cliients, you were correctly done.

That's Max number on the AP.

And you did set 100+ in WLAN setting, you have to see it connected 100+ client on the APs.

Example : If you did set 100 in WLAN setting, Max clients are 110 on 2.4Ghz and 110 on 5Ghz; total is 220 client on APs because you did set 512 under Global >Other > Max cliients.

Thanks.

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Mon, 24 Jun 2019 07:32:23 GMT

Dear Mr. @Jeronimo

I have done what you informed me, but when the device goes to 101, it cannot connect with the notification "Temporarily Full Access Point".

This is my Ruckus R610 setting.

Please help me 😞

Please help 😞

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Mon, 24 Jun 2019 07:52:23 GMT

Do you configure gateway-mode?

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

arie_syamsudin — Mon, 24 Jun 2019 07:55:04 GMT

Gateway mode is disable.

Re: How to set Access Point ruckus r610 so it can be used by more than 100 clients

hyosang_choi — Mon, 24 Jun 2019 08:02:31 GMT

You may help opening a case to solve or confirm.