topic Re: Multiple SSID in Ruckus ZF7372 in Access Points - Indoor and Outdoor

Multiple SSID in Ruckus ZF7372

ibnu_hamzah_680 — Fri, 19 Sep 2014 05:45:21 GMT

Hi All,

can i configure multiple SSID with different VLAN in Ruckus Zoneflex7372 without ZoneDirector?

Re: Multiple SSID in Ruckus ZF7372

monnat_systems — Fri, 19 Sep 2014 07:01:16 GMT

Hello Ibnu Hamzah,

Yes, you can configure multiple SSID with different VLAN in Ruckus Zoneflex7372 without ZoneDirector.

Actually this is applicable to all Ruckus Devices both indoor and outdoor.

Re: Multiple SSID in Ruckus ZF7372

ibnu_hamzah_680 — Fri, 19 Sep 2014 07:46:40 GMT

u can see my configuration..

internet configuration :

this is ethernet configuration :

this is local subnet 1 :

this is local subnet 2 :

this is SSID 1 n SSID 2 :

and know with this configuration, SSID 1 is success but not SSID 2. You know what wrong?

Re: Multiple SSID in Ruckus ZF7372

monnat_systems — Fri, 19 Sep 2014 07:53:16 GMT

Configuration looks right to me and cannot test at this point of time as i am at a site visit.

could you please temme just to be sure what is working and what is NOT?
Also did you try swapping the VLAN info from working to not working SSID to see if that starts to work? this is just to confirm that configuration on AP is ok and NOT some switch VLAN config issue?

Re: Multiple SSID in Ruckus ZF7372

ibnu_hamzah_680 — Fri, 19 Sep 2014 08:56:43 GMT

the isssue is if i connect use SSID 2 gateway not ip address VLAN 30 (10.10.0.45), ip default gateway is local ip address from local subnet 2.

this is configuration in my extreme switch :
port 7 is port 1 in Ruckus with Vlan 80

port 5 is port 2 in Ruckus with Vlan30

this is VLAN Table

Re: Multiple SSID in Ruckus ZF7372

ibnu_hamzah_680 — Fri, 19 Sep 2014 08:59:43 GMT

SSID 1 is working..

this is information IP address use SSID 1

Default gateway is IP Adress VLAN 80.