https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-long-will-upgrade-take/m-p/41256#M11670 The time varies a bit, but for scheduled outage purposes, you should allow about 1 hour for each upgrade (so in your case a 2 hour window). Chances are it will complete early.&nbsp;<BR /><BR />And yes, the ZoneDirector will automatically upgrade each managed AP to the same version (that's part of why the time varies) Mon, 28 Oct 2013 17:21:38 GMT keith_redfield 2013-10-28T17:21:38Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-long-will-upgrade-take/m-p/41255#M11669 Hi <BR /> I am running Zone Director (3000) with version 9.4.0.0 build 110 firmware and I am planning to upgrade to the latest version (9.6.1.0.15) and just wonderd how long this would take. I know I have to upgrade to version 9.4.2 first so ineffect two upgrades. <BR /><BR /> Also am I right in saying that if I upgrade the Zone Director device, then any APs connected to it will also upgrade as well? <BR /><BR /> Thanks <BR /><BR /> Ian Mon, 28 Oct 2013 16:10:19 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-long-will-upgrade-take/m-p/41255#M11669 ian_harrison_60 2013-10-28T16:10:19Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-long-will-upgrade-take/m-p/41256#M11670 The time varies a bit, but for scheduled outage purposes, you should allow about 1 hour for each upgrade (so in your case a 2 hour window). Chances are it will complete early.&nbsp;<BR /><BR />And yes, the ZoneDirector will automatically upgrade each managed AP to the same version (that's part of why the time varies) Mon, 28 Oct 2013 17:21:38 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-long-will-upgrade-take/m-p/41256#M11670 keith_redfield 2013-10-28T17:21:38Z